Sub Promotion

** VIDEO ** Hands-Free Machining vs. Manual Feed

  • 관리자
  • Feb 01, 2017
  • 57459
  • 활동 지수 : 6730






Heading into 2017, we are beginning to see many more plants, refineries, mining operations and production and maintenance facilities adopting requirements to utilize hands-free machining equipment. These operations have seen CLIMAX | H&S TOOL equipment in action and understand the clear safety benefits to operators.


"Tools that are designed to be hands-free are always a safer option, as you can see in this video. Hands-free machining also provides a much more consistent surface finish compared to manual feed finishes. Any time you can keep an operator away from a moving component during operation you are minimizing the threat of a serious injury."


- Jim Miller, Global Training Manager



Seeing is believing! Check out this video to see for yourself the safety and productivity advantages of hands-free machining compared to manual-feed operation:




"Along with remote feed controls and hands-free machining, our Low Pressure Safety Interlock is a unique feature that reduces the hidden danger of an unexpected start-up. In factory settings or in the field, there can be many things that cause an interruption to the air flow. In these situations the Low Pressure Safety Interlock activates, shutting off the system, and when air flow is returned to the unit, it will not start until the operator deliberately starts it up again, as shown in the video. No dangerous surprises!"


- Jim Miller, Global Training Manager



We understand that most safety hazards arise from human error and environmental factors. That's why CLIMAX l H&S TOOL products are designed to be hands-free, user-friendly and mistake-proof to the highest degree possible. Here are some of the innovative safety features CLIMAX l H&S TOOL deliver to help you and your people stay safe on the job: 


Feed controls located on the outside of machines means no more reaching in!

Emergency Stop (E-Stop) for quick stops and controlled re-starts


Low Pressure Safety Interlock prevents unintended re-starts after loss of supplied air pressure

Feed rates can be adjusted while the machine is running - no need to stop or change parts to adjust the feed rate

Remote on/off control of feed systems keeps operators hands away from moving parts

Multiple lifting points available for lifting in all orientations, to simplify balancing and rigging challenges for easier and safer machine positioning

Auto-feed systems keeps operators hands safe from moving parts and keeps the job running smoothly

Bearing guards protect the operator from exposed pinch points and mechanical entanglement hazards, and keep chips and debris out of the bearing and drive systems for increased durability and precision

CLIMAX | H&S TOOL products meet or exceed all safety and quality requirements of the CE standard

Our expert training, applications engineering and tech support are standing by to support the safe  and efficient use of your CLIMAX | H&S TOOL equipment, world-wide




"At CLIMAX | H&S TOOL user safety is our number one priority.  Industry safety standards and regulations have been steadily increasing and we expect this trend to continue in the future, everywhere onsite machining is performed. Rather than finding yourself behind in these safety requirements in the future and spending a lot of your time and money trying to retrofit and catch up, why not get ahead of the safety trend now by choosing CLIMAX | H&S TOOL products? We're the company on the forefront of innovation in safety technology and industry best practices. You and your people deserve the superior performance, quality and safety inherent in all CLIMAX | H&S products. Get your portable machining equipment from the company that cares enough to design, build and support the highest-quality tools in the industry. And - please! - always get proper training and diligently adhere to equipment operating instructions, regulations and industry best practices when machining!"


- Tom Cunningham, CEO





Asia Pacific Headquarters

316 Tanglin Road #02-01

Singapore 247978


Tel: +65 9647 2289 |




LEGAL NOTICE: Proper training must be obtained and proper procedures must be followed and proper supervision must be in place at all times when manufacturing, maintaining, repairing or machining with portable tools of any kind.  Please pay careful attention to the instructions and warnings provided in connection with the product and services.  CLIMAX H&S TOOL's products and services are subject to specific written limitations of liabilities and are covered by express limited warranties, which shall apply to the purchase, rental or use of the products. NO WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE EXPRESS WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY CLIMAX H&S TOOL.  ALL IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE EXPRESSLY WAIVED. The buyer assumes all risks associated with the use of the product.




CLIMAX l H&S TOOL, 715 Weber Dr., Wadsworth, OH 44281



Sent by in collaboration with

제목 날짜
The CLIMAX BB5000 Micro Adjust Boring Head LIVE Q&A 2020.07.31
동영상링크 - Coming Soon – A Safer Work Environment for On-site Technicians 2020.07.16
동영상링크 - The CLIMAX BB5000 Facing Head & Grooving Tool LIVE Q&A 2020.07.16
H&S TOOL Split-Frame Machine: Designed with the Customer in Mind! 2019.10.15
Unmatched Versatility – H&S TOOL End Prep Tool Holders 2019.02.07
The New FF5300 - Unrivaled Performance Advantage #7 2018.09.03
The New FF5300 - Unrivaled Performance Advantage #6 2018.08.14
The New FF5300 - Unrivaled Performance Advantage #5 2018.07.30
The New FF5300 - Unrivaled Performance Advantage #4 2018.07.18
The New FF5300 - Unrivaled Performance Advantage #3 2018.07.12
The New FF5300 - Unrivaled Performance Advantage #2 2018.07.03
The New FF5300 - Unrivaled Performance Advantage #1 2018.07.03
Now Available - The New FF5300 Flange Facer 2018.06.19
VERSATILITY, DURABILITY, AND SAFETY: The OD Mount Flange Facers 2018.02.20
The World's Best Flange Facer Just Got Better! 2017.02.20
Introducing the HYDROPRO Universal Straight Valve Tester 2017.02.13
** VIDEO ** Hands-Free Machining vs. Manual Feed 2017.02.01
IT'S HERE! The new SPEED FACERS 2016.10.12
CLIMAX l H&S Tool hosts its 1st Asia Pacific sales conference in Singapore! 2016.08.16
Mastering Milling Machines: Tramming the Spindle 2016.07.13

서울본사 : 152-779 서울특별시 구로구 디지털로 273 (구로동) 405호
전화: 02-6675-3600      팩스: 02-6675-3610

양산사무소 : 626-230 경남 양산시 어실로 342 (어곡동)
전화 : 055-383-3800      팩스 : 055-383-3810

© k2s0o1d4e0s2i1g5n. All Rights Reserved