The World's Best Flange Facer Just Got Better!
- Feb 20, 2017
- 활동 지수 : 5280
ASKED FOR AN ENHANCED MECHANICAL FEED... WE DELIVERED!
response and feedback on the new CLIMAX FF6300 Flange Facer has been terrific.
Operators are utilizing this tool for many more applications than its
predecessor the FF6200, with the most experienced machinists in the
world wanting even more! We listened and we are excited to introduce
the new FF6300 feedbox which gives operators the best of both worlds
- infinitely variable feed rate AND rock solid consistency.
many flange facing applications the ability to infinitely adjust the
feed rate is needed in order to achieve the required surface finish.
In addition, a common challenge with on-site flange repair is having
access to ideal and consistent air volume and pressure. Significant
loss of air can greatly impact the performance of air-powered
new FF6300 feedbox allows any feed rate to be selected from .002 -
.035 inches/rev (.08 - .089 mm/rev) by using a mechanical adjustment
screw on the feedbox. The adjustment screw sets a hard stop for the
ratchet arm that turns the leadscrew and advances the feed. This hard
stop and the associated feed rate can only be changed by the operator
and will return to the same point every time, even with significantly
reduced air pressure and flow.
feedbox provides customers with what they need - an adjustable and
consistent feed rate every time. You also have the ability to stop
and start the feed while the machine is rotating which is a real nice
feature when cleaning up a cut."
- Jim Miller, Global Training Manager
With this enhancement, the feed rate will
not change due to air fluctuations ensuring this flange facer
produces a consistent feed rate per revolution of the machine,
clearly separating the FF6300 as the best flange facer in its
Call CLIMAX now to find out how you can get
the FF6300 Flange Facer in your hands
and on the job.
Tanglin Road #02-01
Terms and conditions apply as contained in the service
contract. This service not available in all areas. Terms and
conditions may vary by location. Contact your CLIMAX | H&S Tool
representative for details.
NOTICE: Proper training must
be obtained and proper procedures must be followed and proper
supervision must be in place at all times when manufacturing,
maintaining, repairing or machining with portable tools of any
kind. Please pay careful attention to the instructions and
warnings provided in connection with the product and services. CLIMAX
| H&S TOOL's products and services are subject to specific
written limitations of liabilities and are covered by express limited
warranties, which shall apply to the purchase, rental or use of the
products. NO WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE EXPRESS
WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY CLIMAX | H&S TOOL. ALL IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE EXPRESSLY
WAIVED. The buyer assumes all risks associated with the use of the
Copyrightⓒ 2010 (주)국제월즈 All Rights Reserved. Email: firstname.lastname@example.org
© k2s0o1d4e0s2i1g5n. All Rights Reserved